PCB design services involve specialized activities aimed at creating an optimum printed circuit board layout using CAD software and other specialized PCB design tools. There are different kinds of PCBs and the process for each one may vary a bit. Regardless of the type of board or layout, though, it's always going to be roughly the same multi-stage designing process that begins with schematic capture.
At this point, it would be appropriate to note that the client is usually required to provide the designer with information about at least three basic aspects. One is the aforementioned schematic, although it may also be provided by the client as a netlist file. The netlist is simply a file that contains all the connectivity information for the design, along with descriptions of components used.
The BOM or bill of materials is another key requirement which contains a listing of all the components to be used and their footprints. Some designers offer to do the component footprint capture process too. All this and the board outline together provide the designer with everything needed for getting started with the design process.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
There's also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Using this surface-mount technique, the end caps are directly soldered now on the same side of the board. This new method has almost completely replaced the earlier through-hole boards. In these older boards, leads were inserted from one side of the board and soldered onto traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
At this point, it would be appropriate to note that the client is usually required to provide the designer with information about at least three basic aspects. One is the aforementioned schematic, although it may also be provided by the client as a netlist file. The netlist is simply a file that contains all the connectivity information for the design, along with descriptions of components used.
The BOM or bill of materials is another key requirement which contains a listing of all the components to be used and their footprints. Some designers offer to do the component footprint capture process too. All this and the board outline together provide the designer with everything needed for getting started with the design process.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
There's also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Using this surface-mount technique, the end caps are directly soldered now on the same side of the board. This new method has almost completely replaced the earlier through-hole boards. In these older boards, leads were inserted from one side of the board and soldered onto traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
About the Author:
If you are looking for reliable PCB design services, pay a visit to our web pages online at www.tritecdesign.com today. You can see details at http://www.tritecdesign.com now.
No comments:
Post a Comment