It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
Part of the decision to use this cutting edge infrared detection technology requires that the companies you choose for your inspection job are certified. They should have experienced engineers for the job with a proven work record. With the correct inspectors, you will be able to significantly reduce unscheduled power outages and increase energy efficiency, safety and dependability in general.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
Part of the decision to use this cutting edge infrared detection technology requires that the companies you choose for your inspection job are certified. They should have experienced engineers for the job with a proven work record. With the correct inspectors, you will be able to significantly reduce unscheduled power outages and increase energy efficiency, safety and dependability in general.
About the Author:
Read more about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
No comments:
Post a Comment