USBs these days are actually necessities which people need in order to store important data that they have. Of course with it being so popular, many people would actually think of jazzing these thumb drives up a bit. One can actually make custom made usb drives in his home without spending too much.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
About the Author:
Why search everywhere for custom made usb drives when you can easily find them on our website. To see what we have on offer, simply visit our homepage at http://bestcustomflashdrives.com today.
No comments:
Post a Comment